Enabling and Disabling Internet Protocol Version 6 (IPv6) on PCs

What does IPv6 mean to me?

IPv6 has a number of features of interest to IT professionals, including new extension headers and new ICMP (v6) message types. For the majority of users, there is no measurable performance advantage between connecting to websites and other internet resources using IPv4 versus IPv6. However, in the years to come, the exhaustion of available IPv4 address space will mean that some sites and systems on the internet will only be accessible by using IPv6. IPv6-enabled systems on the University network will have no problems communicating with these sites.

How do I know if IPv6 is enabled on my computer?

Most major PC and mobile/tablet operating systems support IPv6 by default, and many will prefer to use IPv6 when it is available. You can see if your device has IPv6 enabled by going to the website test-ipv6.com, which runs a quick check and reports whether or not your system is using IPv6.  

How can I tell if PittNet has IPv6 transport available to my machine?

The IPv6 test report that you will receive by going to http://test-ipv6.com will tell you whether or not your system is connected to a PittNet virtual local area network (VLAN) that supports IPv6.

VLANs are allocations of network address space that have been configured to support a related-group of machines, such as a PCs in a department office or a lab. Your department’s system administrator should be able to tell you if your network connection is on an IPv6-enabled VLAN.

Note: all of PittNet Wi-Fi supports IPv6.

How do I enable or disable IPv6 on my computer?

Some devices and operating systems might not have IPv6 enabled by default. Refer to the Enabling and Disabling IPv6 page for instructions that explain how to turn on and turn off IPv6 on your device.

Will Pitt be turning off IPv4?

There are no plans to turn off IPv4 at this time. IPv4 will be continue to be supported on the University’s network for some time.

Does Pitt IT support translation between IPv4 and IPv6?

No. Pitt IT currently supports IPv6 in the dual stack host method. This means that end nodes must be IPv4 and/or IPv6 natively.

IPv6 at Pitt (PowerPoint Presentation)

• View the presentation

IPv6 in Workstation and Server Zones 

Workstation Zones

All address allocations for workstation zones will be dynamic via DHCP version 6 (DHCPv6) with DDNS proxy via DHCPv6. This means that you will not contact the 24/7 IT Help Desk to request an IPv6 name or address in a workstation zone. Instead, it will automatically be assigned for machines that request one. The name you request in your DHCPv6 request will be granted in the default zone on that subnet, if available. If it is not available, another name from a Pitt IT template will be assigned.

Server Zones

For the time being, Pitt Information Technology will only support static names and static IPv6 addresses in a similar mechanism to how IPv4 names and addresses are allocated now. This practice will help ensure that servers have consistent names, which is important for those who are trying to connect to them. It is up to the user whether the machine has the same name for IPv4 and IPv6 resolution. If you would like the machine to have the same name for IPv4 and IPv6 resolution, you must validate that your applications work with IPv6 transport.   

Bringing Up IPv6 on a Server

IPv6 was made to be “downward compatible” with IPv4. This means that if you have an application that is using an IPv4 transport, it should also work on an IPv6 transport. However, there are scenarios that can complicate this. For example, you may have IPv4 ACLs or you may have IPv4 references inside the app that are being done by IP address. For these reasons, it is important to thoroughly test IPv6 when implementing it on servers.

Bringing up IPv6 on a server involves the following steps and testing procedures:

1. First, make sure to disable IPv6 transport for all target servers.
2. Open a case with Pitt IT to enable IPv6 for the subnet where the affected servers reside. Pitt IT will enable a pre-assigned IPv6 subnet at the router level and will assign overhead firewall rules for the zone.
3. Work with Pitt IT to obtain static IPv6 addresses for all affected servers. The assigned IPv6 domain names will be different than the existing IPv4 domain names. IPv6-enabled servers that join the UNIV (univ.pitt.edu) domain will register the IPv6 domain name with Enterprise Active Directory (AD). This may cause problems with applications on the server that do not support IPv6.
4. Pitt IT will provide an IPv6 router address.
5. Go to firewall.pitt.edu to request the proper IPv6 rules for the application or service that will be hosted on the affected servers.
6. Enable IPv6 on the affected servers.
7. Test all server applications and functions with IPv6 transport enabled.
8. If tests are successful, work with Pitt IT on registering the same domain name for both IPv4 (A-record) and IPv6 (AAA-record) for all affected servers.​​​​​​​

Policy 10-02-05 Computer Access and Use
Policy 10-02-13 University Network